Common Windows Problems; Common Macintosh Problems - Xerox Phaser 3052NI User Manual

Common Problems

Common Windows Problems

Condition
File in Use message appears during installation.
General Protection Fault, Exception OE, Spool 32, or
Illegal Operation messages appear.
Fail To Print, A printer timeout error occurred
messages appear on your PC.
Machine information is not displayed when you click
the device in the Devices and Printers.
Note: Refer to the Microsoft Windows User Guide supplied with your computer for further
information on Windows error messages.

Common Macintosh Problems

Condition
The machine does not print
PDF files correctly. Some parts
of graphics, text, or illustrations
are missing.
The document has printed, but
the print job has not
disappeared from the spooler in
Mac OS X10.3.2.
Note: Refer to the Macintosh User Guide supplied with your computer for further information on
Macintosh error messages.
146 ® ®
Xerox Phaser
User Guide
• Printing the PDF file as an image may enable the file to print. Turn on
Print As Image from the Acrobat printing options.
Note: It will take longer to print when you print a PDF file as an image.
• Update your MAC OS to OS X 10.5 or higher.
3052/3260
Suggested Solutions
• Exit all software applications. Remove all software
from the printer's startup group, then restart
Windows. Re-install the printer driver.
• Close all other applications, reboot Windows and
try printing again.
• These messages may appear during printing. Just
keep waiting until the machine finishes printing.
If the message appears in standby mode or after
printing has been completed, check the
connection and/or whether an error has occurred.
Check the Printer properties. Select the Ports tab.
(Control Panel > Devices and Printers > Right-click on
your printer icon and select Printer properties)
If the port is set to File or LPT, clear the check boxes
and select TCP/IP, USB, or WSD.
Suggested Solutions