Xerox Phaser 3052NI User Manual page 162

Basic Regulations
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper
2
(60 g/m ), which contains less raw material and thus save resources per print, may be used in certain
applications. We encourage you to check if this is suitable for your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to reduce environmental impact. Details on the ENERGY STAR
program and models qualified to ENERGY STAR can be found at the following Web site:
www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQ
The Xerox Phaser 3260 Printer is ENERGY STAR
Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGY
STAR Imaging Equipment Program is a team effort between U.S., European Union and Japanese
governments and the office equipment industry to promote energy-efficient copiers, printers, fax,
multifunction machines, personal computers, and monitors. Reducing product energy consumption
helps combat smog, acid rain, and long-term changes to the climate by decreasing the emissions that
result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory. Your printer will be delivered with the timer for
switching to Power Save Mode from the last copy/print out, set at one minute. A more detailed
description of this feature can be found in the Getting Started section of this guide.
Power Consumption and Activation Time
The amount of electricity a product consumes depends on the way the device is used. This product is
designed and configured to enable you to reduce your electricity costs. After the last print, the device
switches to Ready mode. In this mode, the device can print again immediately if required. If the
product is not used for a period of time, the device switches to a Power Saver mode. In these modes,
only essential functions remain active in order to enable reduced product power consumption.
Upon exiting from Power Saver Mode, the first print will take slightly longer than in Ready Mode. This
delay is the result of the system waking up from Power Saver mode and is typical of most imaging
products on the market.
170 Xerox® Phaser® 3052/3260
User Guide
®
qualified under the ENERGY STAR Program