Connecting The Ieee 1394 (Firewire) Cable; Connecting The Ac Adapter; Turning On The Scanner - Minolta Dimage Scan Elite II Hardware Manual

Connecting the IEEE 1394 (FireWire) cable

Remove the protective cap from the IEEE 1394
port. Securely plug the cable into the scanner's
and computer's IEEE 1394 port. Either end of
the cable can be connected to the IEEE 1394
port on the scanner or computer.
The scanner should be connected directly to the
computer. Attaching the scanner to an IEEE hub
may prevent proper operation.

Connecting the AC adapter

Connect the power cable to the AC
adapter unit (1). Connect the output
plug of the AC adapter to the scanner's
DC terminal (2). Plug the power cable
into a standard household outlet (3).
3
2
1

Turning on the scanner

With the front door closed, turn on the scanner
with the power switch (1). Start up the computer.
When launching the DiMAGE Scan Utility, the
front door must be closed during initialization; the
indicator lamp will blink when the scanner is ini-
tializing. Once the indicator lamp glows steadily,
the scanner can be used.
1
9