Tmc Events Screen - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual

8.1.6 TMC Events screen

You can access the list of TMC events and select or ignore specific radio stations in the list of Traffic
events. Tap the Traffic button on the Map screen.
The colour of the Traffic button show the Traffic status:
Colour
There are no new (unread) Traffic events in the list.
There are new Traffic events but they are not concerning your recommended route.
There are Traffic events on your route. They were handled, but it is better to take
the concerned road segments rather then to avoid them.
Manual Traffic handling is selected in Settings, and there are Traffic events on your
route to be handled.
When you tap the button, the list of current TMC events is displayed first, ordered by their distance
from your current position. You can change the content of the list:
Button
All
On Route
To check the currently received FM radio station, to exclude radio stations or to manually tune to a
radio station, tap
Button
Use Auto-tuner
,
Exclude This Station
Show Excluded Stations
52
Description
All TMC events received by Alpine Navigation Software appear in the
list.
Only TMC events concerning a part of your active route appear in the
list.
:
If Auto-tuner is enabled, the tuner of Alpine Navigation Software
sweeps through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically. When no
TMC signal is available, the tuner keeps on searching. Turn off Auto-
tuner to select a radio station manually.
When Auto-tuner is turned off, search for the desired radio station
manually with these buttons.
Push this button to put the currently received FM radio station on an
exception list and make Alpine Navigation Software search for another
station instead.
This button opens the list of radio stations previously excluded. You
can re-enable any or all of the excluded stations.
Description
Description