Selecting An Intersection As The Destination - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
• Tap
3. Instead of selecting one of the streets, tap
5. Enter the house number:
1. Enter the house number on the keyboard.
2. Tap
6. A list appears with the matching addresses. Tap the desired one.
7. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.

7.1.2.4 Selecting an intersection as the destination

1. Tap the following buttons:
2. By default, Alpine Navigation Software proposes the country/state and settlement where you
are. If needed, tap the button with the name of the country/state, and select a different one
from the list.
3. If needed, change the settlement:
• To select the settlement from the list of recently used ones, tap the
• To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
•
4. Select the settlement from the list.
4. Enter the street name:
1. Start entering the street name on the keyboard.
2. Get to the list of results:
• After entering a couple of characters, the names that match the string appear in a
list.
• Tap
3. Select the street from the list.
32
to open the list of results before it appears automatically.
to finish entering the address.
,
After entering a couple of characters, the names that match the string
appear in a list.
Tap to open the list of results before it appears
automatically.
to open the list of results before it appears automatically.
.
,
.
. The route is
.
button.