Saving The Active Route - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
You return to the map and you can continue driving.
4. Repeat the above steps, then tap
Software labels the Track Log with a time stamp.
Simulating a Track Log on the map
1. Tap the following buttons:
2. Locate the desired Track Log, and then tap the
3. The map returns, and the Track Log simulation (a life-like replay) begins.
4. You can stop the replay any time by tapping the
Changing the colour of a Track Log
1. Tap the following buttons:
2. Tap the desired Track Log and then tap one of the colour buttons.

7.9 Saving the active route

1. Tap the following buttons:
2. Enter a name for the saved route, and then tap
When you save a route, Alpine Navigation Software not only saves the route points but the whole
itinerary:
• The saved route might have been influenced by TMC information. When you later use the
route, it appears as it was saved. But if it needs to be recalculated, the current TMC
information will be used in the new route.
• If you updated your map since you first saved the route, Alpine Navigation Software recognises
the change, and recalculates the driving instructions according to the latest available map
information.
• If you want to save the route, you need to save it before you start navigating. During
navigation, Alpine Navigation Software deletes any waypoints that you already left behind
together with the road segments used to reach it.
40
later to stop the recording. Alpine Navigation
, ,
button next to it.
button.
, ,
, ,
.
.
, .
.