Cursor Menu - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
Symbol

8.1.3 Cursor menu

As soon as you select one point in the Destination menu, the map appears with the Cursor menu,
a menu with possible actions for the selected point.
Alternatively when you tap the map, control buttons appear. Tap again to place the Cursor (
Now tap
You can perform the following actions:
Button
48
Name
, and the Cursor menu opens with a list of options.
Closes the Cursor menu, and returns to the previous screen.
Displayed at the Cursor if it has been relocated since the Cursor menu was
opened.
Zooms out the map.
Zooms in the map.
With the Cursor menu open, you can still move or scale the map, and tap
the map anywhere to place the Cursor to a new location, but when you use
this button, the Cursor jumps back to the place where it was at the time
when you opened the Cursor menu.
Creates a new route with the Cursor as the destination. The previous route
(if exists) is deleted.
Opens the full-screen Cursor menu with all the possible options.
The location of the Cursor is saved as the Home address.
The Cursor is saved as a user POI. Select the POI group and give a name
for the POI, then select a suitable icon, enter a phone number and
additional information if you like.
The Cursor becomes the start point of the route. This means that the route
is not started from the current GPS position, and Automatic Off-route
Recalculation needs to be turned off to keep the selected point as the start
point.
If the Cursor is at or near the selected start point, this button replaces the
previous one and deletes the start point from the route. The current GPS
position is used again as the start point, and Automatic Off-route
Recalculation is re-enabled.
This button is similar to the
opens, and the route is calculated with all the possible route calculation
methods (Fast, Short, Economical and Easy). Observe the results, and
Description
Navigation Software cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
Description
button, but a new screen
).