Route Information Screen - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
Button

8.1.4 Route Information screen

The Route Information screen has all the data and some of the functions you need while you
navigate. There are two ways to open this screen:
•
It can be opened directly from the Map screen by tapping the Turn Preview field (
• From any of the menu screens, tap the following buttons:
In the top section of the screen you see information about the current route. The fields on this screen
are continuously updated while you keep the screen open.
When you open the screen, all fields contain information about reaching your final destination. Tap
any of the fields to see data on the waypoints starting from the first one through the final destination
again.
You have the following data and functions on this screen:
Name
Route line The upper part of this screen shows your
planned route as a horizontal line. Its leftmost
point is the start of the route, the rightmost one
is the final destination, and you can see your
waypoint flags along the line, spaced in
proportion to their distance.
Estimated Arrival Shows the estimated arrival time at the final
Time destination of the route based on information
available for the remaining segments of the
route. The calculation cannot take into account
traffic jams and other possible delays.
choose one of the routes to navigate.
The Cursor is added to the active route as an intermediate route point, a
point to be reached before the destination. If there is already a waypoint in
the route, the Edit Route screen opens to let you decide where the new
waypoint is to appear in the route.
If the Cursor is at or near one of the waypoints, this button replaces the
previous one, and deletes the selected waypoint from the route. The route
is recalculated without the deleted point.
The location of the Cursor is added to the list of frequently visited
destinations, the so called Favourites. You can give a name for the
Favourite.
.
Description
Description
,
Function
Tap this field to change the
content of all data fields to
waypoint information.
n/a
).
,
49