Selecting A City Centre As The Destination - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
5. Tap the
• If only a few intersecting streets exist, their list appears immediately.
• In case of a longer street, a keyboard screen appears. Start entering the name of the
intersecting street on the keyboard. As you type, if the matching streets can be shown
on one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.

7.1.2.5 Selecting a city centre as the destination

The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators
have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an
important intersection.
1. Tap the following buttons:
2. By default, Alpine Navigation Software proposes the country/state and settlement where you
are. If needed, tap the button with the name of the country/state, and select a different one
from the list.
3. If needed, change the settlement:
• To select the settlement from the list of recently used ones, tap the
• To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
•
•
4. Select the settlement from the list.
4. Tap the
5. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.
button.
,
After entering a couple of characters, the names that match the string
appear in a list.
Tap to open the list of results before it appears
automatically.
button.
,
.
. The route is
.
button.
. The route is
33