Trip Information Screen - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
Name
Time Left Shows the time needed to reach the final
destination of the route based on information
available for the remaining segments of the
route. The calculation cannot take into account
traffic jams and other possible delays.
Distance Left Shows the distance you need to travel on the
route before reaching your final destination.
Method
This field shows how the route was calculated. It
either displays the Route Calculation Method or
the Vehicle field from the Route Planning
options.
If you have chosen Car, Taxi or Bus, the type of
the route (Fast, Short, Easy or Economical) will
be displayed here; if you have selected
Emergency,
displayed here.
Warning icons
In these square fields graphical symbols are
displayed in case warnings are attached to the
planned route. These are warnings, so icons
always show information for the whole route,
even if the data fields display values from your
current position to a waypoint only.
Appears only if at least one waypoint exists.
Appears only if there are no waypoints in the
route.

8.1.5 Trip Information screen

The Trip Information screen has both route and travel data you might need during your journey. It can
be opened directly from the Map screen by tapping the Trip Data field (
The fields on this screen are continuously updated while you keep the screen open.
All route data fields contain information about reaching your final destination.
If you want to change the content of the three data fields on the Map screen, tap
You have the following data and functions on this screen:
50
Description
only this information
Function
n/a
n/a
n/a
will be
Tap any of the icons for an
explanation.
Opens the Route Planning
options screen from the
Settings menu.
Deletes the next waypoint
from the route.
Deletes the active route.
).
.