Table of Contents
Advertisement
Quick Links
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
Advertisement
Chapters
Table of Contents
Related Manuals for Alpine NVE-M300P
Summary of Contents for Alpine NVE-M300P
- Page 1 Internet store of PHONES (044) 360-7-130 294-0-130 autogoods (050) 336-0-130 597-0-130 (063) 788-0-130 SKYPE (067) 233-0-130 km-130 (068) 282-0-130 CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories | CAR AUDIO —...
- Page 2 Autogood products «130»...
-
Page 3: Important Information
• If there is anything in the manual which you do not understand, or are uncertain about the operation of the navigation system, please contact an authorised ALPINE representative before using the navigation system. Correct Disposal of This Product The product purchased by you is provided in accordance with the European directive 2002/96 EC on WEEE - Waste Electrical and Electronic Equipment. -
Page 4: Warnings
Read the manuals for this device and the system components carefully before using your navigation system. They contain instructions on how to use the system in a safe and effective manner. ALPINE cannot be held responsible for problems resulting from failure to observe the instructions in these manuals. -
Page 5: Caution
If the fuse(s) blow(s) more than once, carefully check all electrical connections for short circuiting. Also have your vehicle’s voltage regulator checked. Servicing the Unit If you have problems, do not attempt to repair the unit yourself. Return it to your ALPINE dealer or the nearest ALPINE Service Station for servicing. Installation Location Make sure the NVE-M300P Navigation Module will not be exposed to: •... -
Page 6: End User Licence Agreement
NVE-M300P Navigation Module Owner’s Manual 3 End User Licence Agreement 1 The contracting parties 1.1 This Agreement has been entered into by and between Nav N Go Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User;... - Page 7 NVE-M300P Navigation Module Owner’s Manual 6.2 The User is entitled to make one backup copy of the Software Product. However, if the Software Product operates after installation without the use of the original media copy, then the original media copy shall be deemed to be a backup copy. In all other cases, the User is only entitled to use the backup copy if the original media copy of the Software Product has been ascertainably and unequivocally rendered unsuitable for its lawful and intended use.
- Page 8 NVE-M300P Navigation Module Owner’s Manual 9 Sanctions 9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to be breached, the Licensor may 9.1.1 seek judicial recognition of this breach; 9.1.2 demand that the breach cease and order the person in breach to refrain from continuing such actions;...
-
Page 9: Copyright Note
This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics (Europe) GmbH. © 2009 - Alpine Electronics (Europe) GmbH. © 2009 - NAVTEQ. All rights reserved. Albania: ©... -
Page 10: Table Of Contents
3 End User Licence Agreement..................5 4 Copyright note........................8 5 Table of contents ......................9 6 Getting started with Alpine Navigation Software ............12 6.1 Buttons and other controls on the screen ................14 6.1.1 Using keyboards..........................15 6.1.2 Permanent buttons (Menu, Return, Monitor Control and Map).............15 6.2 Using the map......................... - Page 11 NVE-M300P Navigation Module Owner’s Manual 7.1.2.4 Selecting an intersection as the destination .................... 32 7.1.2.5 Selecting a city centre as the destination ....................33 7.1.2.6 Entering an address with a postal code ....................34 7.1.2.7 Tips on entering addresses quickly ......................34 7.1.3 Selecting the Home address ......................35...
- Page 12 NVE-M300P Navigation Module Owner’s Manual 8.5.1 Map Screen settings ........................59 8.5.2 Sound settings ..........................60 8.5.3 Route Planning options ........................61 8.5.4 Regional settings..........................63 8.5.5 Adjust Display ..........................63 8.5.6 Navigation settings.........................64 8.5.7 Warning settings ..........................64 8.5.8 GPS ..............................65 8.5.9 TMC...............................65 8.5.10 Track Log settings........................66 8.5.11 User Data Management........................67...
-
Page 13: Getting Started With Alpine Navigation Software
Start using Alpine Navigation Software When you turn on NVE-M300P Navigation Module for the first time, you need to do the following: Select the written language of the application interface. Later you can change it in Settings (page 63). - Page 14 NVE-M300P Navigation Module Owner’s Manual The Navigation menu: The typical way of using Alpine Navigation Software is to select a destination and start navigating. You can select your destination in the following ways: • Use the selected location on the map (the Cursor) - (page 28).
-
Page 15: Buttons And Other Controls On The Screen
When you are using Alpine Navigation Software, you usually tap buttons on the touch screen. You only need to confirm selections or changes in Alpine Navigation Software if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings. -
Page 16: Using Keyboards
NVE-M300P Navigation Module Owner’s Manual 6.1.1 Using keyboards You only need to enter letters or numbers in Alpine Navigation Software when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example ABC, QWERTY or numerical. -
Page 17: Using The Map
6.2 Using the map The map screen is the most frequently used screen of Alpine Navigation Software. It can be accessed from any other screen by tapping For further information about the map screen, see page 42. - Page 18 Multi-function Show Start position / Return to GPS position / Repeat button. voice instruction. See page 15 for details. Map scale Alpine Navigation Software shows the scale of the map in 2D mode. Autogood products «130»...
-
Page 19: Lane Information And Signposts
When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane informations are available in the map data, Alpine Navigation Software displays the lanes and their directions using small arrows at the bottom of the map. Arrows in yellow represent the lanes you need to take. - Page 20 Data screen (page 53). Icon Status for More information GPS position quality A higher number of lit bars indicates better GPS position accuracy. Track log recording Alpine Navigation Software records a Track log when GPS position is available. Autogood products «130»...
-
Page 21: Using The Cursor (The Selected Map Location)
NVE-M300P Navigation Module Owner’s Manual 6.2.4 Using the Cursor (the selected map location) First, place the Cursor at the desired map location with one of the following options: • Use the Destination menu to select a location. The map returns with the selected point (the Cursor) in the middle, and the Cursor menu appears with the available options. -
Page 22: Alpine Navigation Software Concepts
6.3.2 Position markers 6.3.2.1 Current GPS position and Lock-on-Road When your GPS position is available, Alpine Navigation Software marks your current position with the icon on the map. The exact location of the position marker depends on the vehicle type used for route calculation. The vehicle type can be selected in Route settings (page 61). -
Page 23: Selected Location (Cursor)
If you select a location in the Destination menu, or you tap the map when the map control buttons are visible, the Cursor appears at the selected point on the map. Alpine Navigation Software displays the Cursor with a large circle ( ) to make it visible at all zoom levels, even when it is in the background of a 3D map view. -
Page 24: Route Calculation And Recalculation
Alpine Navigation Software automatically recalculates the route if you deviate from the proposed itinerary. Depending on the type of the TMC event, Alpine Navigation Software also recalculates the route if a TMC event concerns a part of the recommended route. -
Page 25: Turn List (Itinerary)
NVE-M300P Navigation Module Owner’s Manual 6.3.6 Turn List (Itinerary) The Itinerary is the list of the route events, it equals the driving instructions. To display the Turn List, tap the following buttons: You have the following options on the Itinerary screen:... -
Page 26: Track Logs
A simulation drives you through the route, following the driving instructions (page 38). You can use it, for example, to see which bridge Alpine Navigation Software planned for the route; if you do not want to take that bridge, you can avoid it. -
Page 27: Road Safety Cameras
The location of a Road Safety Camera is a special POI. These cannot be searched like other POIs, and there is a special proximity warning only for cameras. Is NVE-M300P Navigation Module shipped with a built-in database of Road Safety Cameras? -
Page 28: Speed Limit Warning
NVE-M300P Navigation Module is sold with a TMC module, which is needed to receive TMC data. To receive the signal, you also need a TMC antenna – several models can be purchased as accessory –... -
Page 29: Navigating With Alpine Navigation Software
NVE-M300P Navigation Module Owner’s Manual 7 Navigating with Alpine Navigation Software You can set up your route in Alpine Navigation Software in several ways: • if you need a simple route (a route with only one destination, without any intermediate waypoints), you can select the destination and start navigating to it right away •... -
Page 30: Entering An Address Or Part Of An Address
Tap the following buttons: By default, Alpine Navigation Software proposes the country and settlement where you are. If needed, tap the button with the name of the country, and select a different one from the list. -
Page 31: Entering An Address If House Numbering Is Restarted
Tap the following buttons: By default, Alpine Navigation Software proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. -
Page 32: Entering An Address Without Knowing The District/Suburb
In this case, follow the instructions below: Tap the following buttons: By default, Alpine Navigation Software proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. -
Page 33: Selecting An Intersection As The Destination
7.1.2.4 Selecting an intersection as the destination Tap the following buttons: By default, Alpine Navigation Software proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. -
Page 34: Selecting A City Centre As The Destination
In towns and villages, it is usually the most important intersection; in larger cities, it is an important intersection. Tap the following buttons: By default, Alpine Navigation Software proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. -
Page 35: Entering An Address With A Postal Code
7.1.2.7 Tips on entering addresses quickly • When you are entering the name of a settlement or a street, Alpine Navigation Software only displays those characters that appear in possible search results. The other characters are greyed out. -
Page 36: Selecting The Home Address
7.1.5 Selecting the destination from the POIs You can select your destination from the POIs included with Alpine Navigation Software or from the ones you have previously created. Tap the following buttons: Select the area around which the POI should be searched for: •... -
Page 37: Selecting The Destination From The History
NVE-M300P Navigation Module Owner’s Manual • : The POI will be searched for not around a given point, but by the size of the detour it adds to the active route. This can be useful if you search for a later stopover that causes only a minimal detour, for example upcoming petrol stations or restaurants. -
Page 38: Selecting The Destination By Entering Its Coordinates
NVE-M300P Navigation Module Owner’s Manual 7.1.7 Selecting the destination by entering its coordinates Tap the following buttons: [optional] Tap to change the format of the displayed coordinates. Tap the latitude or longitude value to change the coordinates. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the longitude (E or W). -
Page 39: Editing The Route
The simulation can be aborted any time by tapping 7.5 Pausing the active route You do not need to pause the active route: when you start driving again, Alpine Navigation Software restarts the voice instructions from your position. Autogood products «130»... -
Page 40: Deleting The Next Waypoint From The Route
Tap it to cancel the whole route. 7.8 Using Track Logs Alpine Navigation Software can record the track (how your GPS position changed) that you drive. Tip! You do not need to select a destination and create a route for this; you can also record your driving path while cruising. -
Page 41: Saving The Active Route
7.9 Saving the active route Tap the following buttons: Enter a name for the saved route, and then tap When you save a route, Alpine Navigation Software not only saves the route points but the whole itinerary: • The saved route might have been influenced by TMC information. When you later use the route, it appears as it was saved. -
Page 42: Loading A Saved Route
NVE-M300P Navigation Module Owner’s Manual 7.10 Loading a saved route Tap the following buttons: Tap the route you wish to navigate. In the very likely case when the start position of the saved route is different from the current GPS position, you need to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route. -
Page 43: Reference Guide
NVE-M300P Navigation Module Owner’s Manual 8 Reference Guide On the following pages you will find the description of the different menu screens of Alpine Navigation Software. The Navigation menu: Alpine Navigation Software starts with the Navigation menu. From there you can access the following... - Page 44 NVE-M300P Navigation Module Owner’s Manual Symbol Name Action Turn Preview Opens the Route Information (the next route event) screen Traffic information Opens the list of Traffic events Trip data Opens the Trip Information screen Opens the GPS Data screen GPS position quality...
-
Page 45: Icons On The Map
NVE-M300P Navigation Module Owner’s Manual Symbol Name Action Lane information Signpost information Orange line Active route Map scale (2D map only) Speed limit 8.1.1 Icons on the map There are several status icons on the map. Most of them also function as a button. The information they provide is as follows: •... -
Page 46: Next Route Event (Turn Preview Field)
GPS reception quality shows the current accuracy of the position information. Icon Description Alpine Navigation Software is connected to the GPS receiver , but the signal is too weak and the receiver cannot determine the GPS position. Only a few satellites are received. Position information is available, but elevation (altitude) cannot be calculated. -
Page 47: Objects On The Map
8.1.2 Objects on the map 8.1.2.1 Streets and roads Alpine Navigation Software shows the streets in a way that is similar to how the paper road maps show them. Their width and colours correspond to their importance: you can easily differentiate a motorway from a small street. -
Page 48: Elements Of The Active Route
NVE-M300P Navigation Module Owner’s Manual 8.1.2.3 Elements of the active route Alpine Navigation Software shows the route in the following way: Symbol Name Description Current GPS position Your current position displayed on the map. If any vehicle type is selected for route calculation and roads are near, the symbol is put on the nearest road. -
Page 49: Cursor Menu
NVE-M300P Navigation Module Owner’s Manual Symbol Name Description Navigation Software cannot avoid such roads, the route will include them and it will show them in a colour that is different from the route colour. 8.1.3 Cursor menu As soon as you select one point in the Destination menu, the map appears with the Cursor menu, a menu with possible actions for the selected point. -
Page 50: Route Information Screen
NVE-M300P Navigation Module Owner’s Manual Button Description choose one of the routes to navigate. The Cursor is added to the active route as an intermediate route point , a point to be reached before the destination. If there is already a waypoint in the route, the Edit Route screen opens to let you decide where the new waypoint is to appear in the route. -
Page 51: Trip Information Screen
NVE-M300P Navigation Module Owner’s Manual Name Description Function Time Left Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route. The calculation cannot take into account traffic jams and other possible delays. -
Page 52: Trip Computer Screen
This button replaces the previous one if it has been activated. Tap it to resume collecting trip data. Resets all counters of the currently shown trip. Collecting trip data is restarted only when Alpine Navigation Software receives a position from the GPS. Cycles through all trips. Autogood products «130»... -
Page 53: Tmc Events Screen
You can change the content of the list: Button Description All TMC events received by Alpine Navigation Software appear in the list. On Route Only TMC events concerning a part of your active route appear in the list. -
Page 54: Gps Data Screen
NVE-M300P Navigation Module Owner’s Manual 8.1.7 GPS Data screen Tap the status field to open the GPS Data screen and to see the status of GPS reception. Icon Colour Name Description Green GPS position quality Alpine Navigation Software has a... -
Page 55: Destination Menu
35 You can select the previously saved Home location as your destination. The destinations that you have already entered in Alpine page 36 Navigation Software are available in the History list. You can select your destination from the thousands of POIs... -
Page 56: Edit Menu
, you will have to rebuild it from scratch. You can run a demonstration of the route at normal speed. page 25 8.4 Edit menu You can manage the content that Alpine Navigation Software stores. Tap the following buttons: Button Description Reference... -
Page 57: Manage Favourites
NVE-M300P Navigation Module Owner’s Manual 8.4.1 Manage Favourites You can manage the list of your Favourites. Tap the following buttons: Button Description Button with the name of the Opens the selected Favourite for editing. Favourite Deletes the selected item in the list of Favourites. -
Page 58: Manage Saved Routes
NVE-M300P Navigation Module Owner’s Manual When a POI group is open for editing: Button Description Items in the POI group will not be shown on the map. The distance buttons set the zoom level from which the items in the POI group will be shown on the map. -
Page 59: Manage Track Logs
Saves the Track Log onto an inserted USB stick in GPX format. 8.5 Settings menu You can configure the program settings and modify the behaviour of Alpine Navigation Software. Tap the following buttons: The Settings menu has more pages of submenus. Tap to access the other options. -
Page 60: Map Screen Settings
Reference You can fine-tune the appearance and content of the Map page 59 screen. You can adjust the sounds of Alpine Navigation Software. page 60 These settings determine how routes will be calculated. page 61 These settings allow you to customise the application for your... -
Page 61: Sound Settings
Colour Profiles Alpine Navigation Software is able to show the map and the menus in different colours during the day and during the night. Select the colour profiles to be used in each mode and select the automatic or manual switching between the daytime and night colour profiles. -
Page 62: Route Planning Options
Cursor menu. TMC Reroute Method This setting determines how Alpine Navigation Software uses the received TMC information in route recalculation: • Auto: When route recalculation becomes necessary based on the received TMC events , Alpine Navigation Software recalculates the route automatically. - Page 63 Per-use Toll By default Alpine Navigation Software includes toll roads (pay roads where there is a per-use charge) in the routes. If you disable toll roads, Alpine Navigation Software plans the best toll-free route. Period Charge Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time.
-
Page 64: Regional Settings
You can set the date and time format. Various international formats are available. Time and Time Zone Settings You can access time and time zone settings. Alpine Navigation Software helps you with correcting the device time to the ever accurate GPS time. Alpine Navigation Software can also help you set the time zone based on your current GPS position. -
Page 65: Navigation Settings
Warn When Speeding Maps may contain information about the speed limits of the road segments. Alpine Navigation Software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer) o r may not be fully correct for all roads in the map. -
Page 66: Gps
Button Description Use Auto-tuner If Auto-tuner is enabled, the tuner of Alpine Navigation Software sweeps through the FM CCIR radio band searching for a TMC signal. The first station with TMC data will be used automatically. When no TMC signal is available, the tuner keeps on searching. Turn off Auto- tuner to select a radio station manually. -
Page 67: Track Log Settings
Navigation Software to record the native GPS data received from the GPS device. These logs are saved as separate text files on an inserted USB stick and they cannot be shown or replayed in Alpine Navigation Software. Autogood products «130»... -
Page 68: User Data Management
NVE-M300P Navigation Module Owner’s Manual 8.5.11 User Data Management You can manage the data you have saved (e.g. POIs, Favourites or History) and the settings you have made in the program. Tap the following buttons: Button Description Backup User Data All user data and the current settings will be saved on an inserted USB stick. -
Page 69: Glossary
GPS device does not give you elevation data: only 2D reception is possible. Active route The currently navigated route. You can save and load routes in Alpine Navigation Software, but only one route can be active at any given time and it is always active until you delete it, reach your destination or you quit Alpine Navigation Software. - Page 70 Scheme Alpine Navigation Software comes with different colour schemes for the map for daytime or night use. Schemes are custom graphic settings for the map and they can have different colours for streets, blocks or surface waters in 2D and 3D modes and they display shades or shadows in different ways in 3D mode.
-
Page 71: In The Box
NVE-M300P Navigation Module Owner’s Manual 10 In the Box 10.1 Accessories • NVE-M300P Navigation Module • TMC Module • Power Vehicle Hanes Cable • Velcro Fastener • Flanged Self-tapping Screw (M4×14) • 13pin RGB Extension Cable • USB Mini Cable •... -
Page 72: Specifications
NVE-M300P Navigation Module Owner’s Manual 11 Specifications Main Unit Size (WxHxD) 85mm x 25mm x 110mm (3.35" x 0.98" x 4.33") Main Unit Weight 265g (9.35oz) Atlas III Titan (600 MHz) Sensor Built-In Gyro and Built-In Acceleration Sensor, 12 channel (32 channel acquisition) GPS Receiver... - Page 73 Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Tel.: 02-725 1315 © 2009 NAVTEQ. All Rights Reserved. © 2009 ALPINE Electronics, Inc. All Rights Reserved. Autogood products «130»...
Need help?
Do you have a question about the NVE-M300P and is the answer not in the manual?
Questions and answers