Selecting The Home Address; Selecting The Destination From Your Favourites; Selecting The Destination From The Pois - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
• You can search for both the type and the name of a road. If the same word appears in several
names, for example in the name of streets, roads and avenues, you can obtain the result faster
if you enter the first letter of the street type: For example, enter PI A to obtain Pine Avenue and
skip all Pine Streets and Pickwick Roads.
• You can also search in postal codes. This is useful when a street name is common and it is
used in several districts of a city.

7.1.3 Selecting the Home address

You can select your Home address if you have already saved it.
1. Tap the following buttons:
2. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.

7.1.4 Selecting the destination from your Favourites

You can select a location that you have already saved as a Favourite to be your destination.
1. Tap the following buttons:
2. Tap the Favourite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap
then automatically calculated, and you can start navigating.

7.1.5 Selecting the destination from the POIs

You can select your destination from the POIs included with Alpine Navigation Software or from the
ones you have previously created.
1. Tap the following buttons:
2. Select the area around which the POI should be searched for:
•
•
•
route.
,
,
,
: The POI will be searched for around a given address.
: The POI will be searched for around the current GPS position.
: The POI will be searched for around the destination of the active
, .
, .
, .
. The route is
. The route is
35