Track Logs; Route Demonstration; Poi (Points Of Interest) - Alpine NVE-M300P Owner's Manual

Navigation module

Table of Contents

NVE-M300P Navigation Module Owner's Manual

6.3.7 Track Logs

Alpine Navigation Software can log the track that you drive (page 39).

A Track Log is a recording of how your GPS position changed and it is independent of the route

Alpine Navigation Software calculated.

Track Logs can be recorded, renamed, replayed, shown on the map, exported to a USB stick in GPX

format, and deleted. See page 58.

Independently of the normal track log, you can instruct Alpine Navigation Software to record the

native GPS data received from the GPS device. These logs are saved as separate text files on USB

stick and they cannot be shown or replayed in Alpine Navigation Software.

To turn on NMEA/SIRF log saving, tap the following buttons:

A simulation drives you through the route, following the driving instructions (page 38).

You can use it, for example, to see which bridge Alpine Navigation Software planned for the route; if

you do not want to take that bridge, you can avoid it.

Tap the following buttons:

A point of interest (POI) is a location that someone might find useful or interesting. Alpine Navigation

Software is delivered with thousands of POIs and you can also create your own POIs in the

application.

POI locations are marked on the map with special icons. POI icons are quite large so you can easily

recognise the symbol. The icons are semi-transparent: they do not cover the streets and intersections

behind them.

POIs are grouped into several levels of categories and subcategories. The icon of a POI that comes

with the map shows the symbol of the POI category. If you save your own POI, you can select an icon

for it independently of the POI category you have put it in.

Table of Contents

Table of Contents