Navigation Settings; Warning Settings; You Can Control How Alpine Navigation Software Behaves; You Can Enable And Fine-Tune Some Useful Warnings - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual
Button
Display Adjustment

8.5.6 Navigation settings

You can control how Alpine Navigation Software behaves during navigation.
Tap the following buttons:
Button
Keep Position on Road
Off-route Recalculation
Restore Lock-to-Position

8.5.7 Warning settings

You can enable some useful warnings and disable the touch screen in a moving vehicle with Safety
Mode. Tap the following buttons:
Button
Warn When Speeding
64
You can fine-tune the position of the screen content on the display.
Tap this button, use the arrows to reposition the application window,
and then tap to save the changes and exit.
, ,
This feature allows drivers to always correct GPS position errors by
matching the vehicle position to the road network.
By turning off this feature you also turn off the GPS position error
filtering. The position shown on the map will be subject to all position
errors and position fluctuations.
This switch tells Alpine Navigation Software whether to automatically
recalculate the route when you deviate from it. If this feature is turned
off, you need to initiate route recalculation manually otherwise
navigation will be stopped until you return to the originally
recommended route.
Setting another point than the current GPS position as the start point
of the active route will automatically disable this feature.
If you have moved or rotated the map during navigation, this feature
moves the map back to your current GPS position and re-enables
automatic map rotation after the given period of inactivity.
,
Maps may contain information about the speed limits of the road
segments. Alpine Navigation Software is able to warn you if you
exceed the current limit. This information may not be available for your
region (ask your local dealer) or may not be fully correct for all roads in
the map. This setting lets you decide whether you wish to receive the
warnings. You can set the relative speeding level at which the
application warns you (100% represents the current speed limit):
• In Built-up Areas: in cities and towns
• Elsewhere: at all other locations
Description
,
Description
, ,
Description
.
.