LED display in the View Finder (2 inch)
R TALLY: Lights on during Red tally is on.
G TALLY: Lights on during Green tally is on.
EXT: Lights on during lens extender is used.
MODE: Lights on during Gain is set to M or H, or shutter is on.
Menu & LED display adjustment detail
Refer to Function Menu operation
Screen Status Menu Display in the Viewfinder
In addition to the video image, the viewfinder displays messages related to camera settings and
operating status and other information.
●When set to on at the setting menu VF DISPLAY menu, setting items are indicated at the top and
bottom edges of the screen.
●Messages regarding switch changes and adjustments are shown for about 3 seconds at the center of
1/250, 1/500, 1/1000, 1/2000
1/179.8 to 1/2022 (179.82i)
1/150.0 to 1/2008 (150i)
0 to 99
0 to 255
CAP and 1 to 4
A to F
-3dB, 0dB, 3dB, 6dB, 9dB, 12dB,
15dB, 18dB, 21dB, 24dB
F1.2 to F22
Iris F stop
Either of the following.
・When the extender is X1.
・The lens cable is not connected.
When the extender is X2.
Auto electronic shutter
Indicates the approximate zoom position of a lens
between wide angle (0) and telephoto (99). Shows
how close it is to the telephoto side.
Shows the focus position of a lens as a numeric value
(0 to 255(infinity)).
Displays the type of ND filter currently selected.
Displays the type of CC filter currently selected. The
"F" is ECC 5600K.
The value of Master Gain set now is displayed.
The Lens cable is not connected.