Lcd Screen Brightness Adjustment; Closing Lcd Monitor; Viewing Subject Through Viewfinder - Hitachi DZ-MV270A Instruction Manual

LCD Screen Brightness Adjustment
1
Press the LCD BRIGHT hutton.
The" BRIGHT" indicator will light on tile screen.
(Tile indicator will go out in approximately 5
seconds.)
BRIGHT indicator
LCD BRIGHT button @ (_ button
2 Use the @ @ button to adjust tile brightness.
Pressing @ @will change the brighmess of LCD
screen and also move tile position of" BRIGHT"
bar scale.
Closing LCD Monitor
Before closing the LCD monitor, he sure to reset it
at
right angles
to tile DVD video camera/recorder.
Replace the LCD monitor oil the DVD video
camera/recorder with tile LCD screen fhcing
inward tmtil a click is heard.
Note: Be sure to return the LCD monitor at right
angles to the DVD video camerakecorder before
closing it or replacing it on the DVD video cam-
era/recolder with its screen facing outside If the
LCD monitor is tilted, it cannot be closed to the
DVD video camera/lecorder
Note: If the LC D monitor is not seculely locked to
the DVD video camerakecolder, no image will
appear in the viewfinder
Viewing Subject through Viewfinder
A
!-kctjust tile angle of viewfinder as you like, and
fit your eye to the eyecup.
If the image is blurred, you can adjust the focus.
Adjust the diopter control trader tile eyecup so
that tile subject image can be seen clearly.
Note: If the LCD monitor is open, the viewfinder
will be off
41