Application note: Trunk video transmission
An external HD-SDI (1080i) video source can be transmitted from camera to CCU.
The video source can be transmitted to CCU and then output from CCU in synchronization with
How to use:
Change an internal coaxial cable inside CA-HF1500 to assign the trunk video input on HD-SDI2
connector. Be sure to shut down the camera power before following works.
1) Loose four screws on the right cover of CA-HF1500, and detach the cover.
TRUNK VIDEO IN
2) Replace the internal coaxial cable on connector labeled "RMONI" to another connector labeled
3) Attach the right cover carefully not to tuck internal cables, and tighten four screws.
In this way, an external HD-SDI video can be transmitted from HD-SDI2 connector to the CCU:
CU-HD1500. As for the CCU setting, please refer to the CU-HD1500 operation manual.