Facility names and functions E
CS switch can be assigned as a shortcut by
CUSTOM SW menu.
TALLY ON/OFF switch
Turn on switch to enable TALLY LED E3 to
light, or turn off switch to prevent from
lighting by mistake.
RED/GREEN TALLY LED
Lights at green or red tally input.
RET1/2 transmission signal switch
This switch is used to select a return video
signal among four external video sources
input to CCU. These four signals can be
assigned by CCU menu.
RET 1/2 switch
Selects RET-1/RET-2 input.
Selected return video is displayed on view
finder while this button is pressed.