Download  Print this page

Setup Card - Hitachi SK-HD1500-S2 Operating Instructions Manual

Hd color camera
Hide thumbs

Advertisement

Table of Contents

Setup card

Setup card
A SD memory card can be used for storing the setting menu data.
The data can then be used to quickly set the proper setup.
Setting data in a SD memory card can be transferred between same model, can not be transferred
Between different ones.
Handling
The SD memory card can be inserted and removed regardless of power on or off.
However, avoid removing while loading, saving or formatting is in progress, since operating error or
SD memory card breakage can occur.
Inserting
Position the SD memory card as shown then insert the SD memory card into the insertion hole. If you
intend to use the miniSD cards in the camera, always install the adapter specially designed for
miniSD cards. (The unit will not work properly if only adapter is installed. Make sure that the card
has been installed in the adapter before using it.)
Removal
Press the setup card for rejection.
Notes
-When inserting the setup card, do not mistake its orientation.
If the setup card is hard to insert, do not force it in but check the orientation.
-Any SD memory card with the following capacities (64MB to 2GB) memory cards can
be used with the camera.
The SD card logo is a registered trademark.
CAUTION
Avoid the following when handling the setup card.
・High temperature and humidity
・Water drops
・Electric fields.
30

Advertisement

Table of Contents
loading

  Related Manuals for Hitachi SK-HD1500-S2