About This Manual - Fujitsu ETERNUS DX60 S3 Overview Manual

Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX60 S3 Disk storage system
(hereinafter referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or
non-Fujitsu servers.
This manual provides the basic information that is required to use the ETERNUS DX.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
Please carefully review the information outlined in this manual.

About This Manual

Organization
This manual is composed of the following four chapters:
• "Chapter 1 Overview" (page 12)
This chapter provides an overview and describes the features of the ETERNUS DX.
"Chapter 2 Specifications" (page 16)
•
This chapter describes the specifications, the function specifications, and the operating environment of the
ETERNUS DX.
"Chapter 3 Functions" (page 25)
•
This chapter explains the available functions for the ETERNUS DX.
"Chapter 4 Hardware Configurations" (page 49)
•
This chapter explains hardware configurations for the ETERNUS DX.
3
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
Preface
First Edition
December 2014
P3AM-8972-01ENZ0