Chapter 3
Functions
3.6
Operation Management
■
Remote Power Operation (Wake On LAN)
Wake On LAN is a function that turns on the ETERNUS DX via a network.
When "magic packet" data is sent from an administration terminal, the ETERNUS DX detects the packet and
the power is turned on.
To perform Wake On LAN, utility software for Wake On LAN is required and settings for Wake On LAN must be
performed.
The MAC address for the ETERNUS DX can be checked on ETERNUS Web GUI.
Figure 3.15 Power Supply Control Using Wake On LAN
LAN
Packet transmission
ETERNUS DX
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
Administration terminal
Wake On LAN utility
40
P3AM-8972-01ENZ0