ETON America, LLC
Service Bulletin
Bulletin No:
0032
Date: 07/23/2004
Viper models with no power or bad throttle response. Remove the 4mm spark arrestor retainer bolt
as shown in figure 2. Then remove the spark arrestor with a pair of needle nose pliers (figure 3).
Then clean the screen or replace the element part # 811008.
Symptoms of a dirty spark arrestor.
1. Loss of power or no power
2. Bad throttle response
3. No start situation
Figure 1
Figure 3
2005 Viper Models No Power
Figure 2
Figure 4