Transmission System; Gear Box Separation; Disassembly - Eton America Rascal IXL-40 Service Manual

7. TRANSMISSION SYSTEM

7.1 GEAR BOX SEPARATION

Remove the sprocket and fixing plate from the
final shaft. Check the sprocket for damage and
replace if necessary.
Remove the five bolts and one clamp pulser
cord.
Remove the gearbox cover while tapping the cases at
several locations with a rubber mallet or soft
hammer.
Remove the dowel pins and gasket. GEAR SHAFT

DISASSEMBLY

Remove the counter gear composition. Remove the
idle gear composition. Remove the final shaft
composition. Remove the drive shaft composition.
7-1