Gear Shaft Assembly; Gear Box Assembly - Eton America Rascal IXL-40 Service Manual

7.2 INSPECTION
Check the gears for abnormal wear or lack of
lubrication.
Replace the gears if necessary.
Turn the inner race of the bearing with your finger. The
bearing should turn smoothly and quietly.
Also check that the outer races of the bearings fit tightly in
the gear box.
Replace the bearings if they are abnormal.

7.3 GEAR SHAFT ASSEMBLY

Assemble the drive, final, idle and counter gear compo-
sitions in the reverse order of disassembly.

7.4 GEAR BOX ASSEMBLY

Clean off the gasket materials from the gearbox surface.
Install the dowel pins and replace the gasket.
7-2