Front Wheel; Removal Of Kingpin And Tie-Rod - Eton America Rascal IXL-40 Service Manual

FRONT WHEEL/STEERING
Install the rear brake lever bracket, aligning the boss with
the hole. Tighten the screw securely.
Align the split line of the throttle housing and holder with
the punch mark. Tighten the screw securely.

8.4 FRONT WHEEL

REMOVAL
Raise the front wheels off the ground by placing a
block under the frame.
Remove the front wheel nuts, washer, and wheels.
INSTALLATION
Install and tighten the four-wheel nuts.
Torque:
55-65 N/m (35-45 ft-lbs.)
Remember put a cotter pin in the castle nut.
8.5 STEERING SYSTEM

REMOVAL OF KINGPIN AND TIE-ROD

Remove the front wheels.
Remove the four self-lock nuts from the tie-rod ball
joints and take off the two tie-rods.
8-4