Brake System - Eton America Rascal IXL-40 Service Manual

MAINTENANCE
Remove the chain protection cover.
Adjust the chain slack.
Loosen the lock bolts (4), and then adjust the drive
chain slack by turning the adjusting nut.
Tighten the four lock bolts.
When the drive chain becomes very dirty, it should be
removed, cleaned, and lubricated with a specified lubricator.
Use commercial chain lubricant to lubricate the drive chain.
Clean the drive chain with kerosene and wipe it dry.
Inspect the drive chain for possible wear or damage.
Replace the chain if it is worn excessively or damaged.
Inspect the sprocket teeth. If it shows signs of excessive wear
or damage, replace.

2.10 BRAKE SYSTEM

Inspect the rear brake lever and cable for excessive play
or damage.
Replace or repair if necessary.
Measure the free play of the rear brake lever at the end of
the lever. The standard is
15-25 mm.
2-5