Rear Brake And Wheel Installation - Eton America Rascal IXL-40 Service Manual

Check the turning of bearing with fingers.
The bearings should turn smoothly and quietly.
Replace if necessary.
INSTALLATION
Add grease to the dust seal lips and install dust seals.
Assemble the rear axle and the driven sprocket.
Assemble the drive chain on the driven sprocket.
Assemble the master link and retaining clip. Note
the retaining clip direction. Install the drive chain
cover. Assemble the chain under cover.
9.5 REAR BRAKE AND WHEEL
INSTALLATION
Install the brake panel
Add grease to the brake cam and anchor pin.
Install the brake arm spring and oil seal.
9-5