COMBUSTION SYSTEM
5.4 PISTON RING INSTALLATION
Clean the piston ring grooves thoroughly and install the
piston rings.
Avoid piston and piston ring damage during
NOTE:
installation.
Align the piston rings slit with the lobe on the grooves.
After installation, the rings should be free to rotate in the
ring grooves.
5.5 PISTON INSTALLATION
Install the connecting 2 bearing and washer.
Install the piston with its mark on the Inlet Pipe side.
Install the piston, piston pin, and new pin clips.
NOTE:
Don't allow the clip to fall into the crankcase.
5-4