Cdi Speed Limiter Adjustment Procedure. - Eton America Rascal IXL-40 Service Manual

Service Bulletin
Bulletin No: 0014
Date: 03/07/2001
Rascal IXL 40
CDI Speed Limiter Adjustment Procedure
Units affected:
All IXL-40 models (Rascal).
Reason for bulletin:
CDI speed limiter adjustments.
Repair:
Adjusting CDI speed limiter as required
Verify repair:
Road test and verify ease of starting and proper speed range after speed limiter is adjusted.
Rascal CDI Speed Limiter Adjustment
Adjusting the CDI speed limiter will also reduce plug fouling concerns and is a more efficient way to
adjust speed for beginning riders. Adjust the CDI speed limiter to the desired speed and power and then
adjust the throttle stop screw for restricting amount of throttle available. The following pictures show were the
CDI speed limiter adjustment screw is located. Remove rubber cover for access to screw. Speed adjustment
on the CDI is done by turning the white screw in the adjustment pod.
To decrease the speed turn the
To increase the speed turn the
ETON America, LLC
Rascal (IXL 40): CDI Speed Limiter Adjustment Procedure.
adjustment screw clockwise.
adjustment screw counter-clockwise.