12.7 Engine Will Not Start
(Start motor turns)
Engine Does Not
Start
Is Ignition
switch on?
Engine stop
switch on?
Is brake
lever applied?
Test the brake switch. The brake switch is a
normal open switch. Disconnect the two leads
on the switch and test continuity with a
multi-meter. With brake lever applied, there
should be continuity and with brake lever
released there should be no continuity.
Did switch test
correctly?
Legend:
Flow
"Yes"
"No"
Turn on ignition
switch
Turn on engine
stop switch
Fully apply brake
lever
Repair or replace
brake switch
Continue to
12.7.2
12-6
Engine
starts?
Engine
starts?
Engine
starts?
Problem Solved.
Engine
starts?