Gear Oil - Eton America Rascal IXL-40 Service Manual

MAINTENANCE
Carefully moving the vehicle back, let the wheels turn
180° so the marks on the tires are aligned with the axle
center height.
Measure the distance between the marks.
Calculate the difference in the front and rear measure-
ments.
Toe-in: 5±10mm
If the toe-in is out of standard, adjust it by changing the
length of the tie-rods equally by turning the tie-rod while
holding the ball joint.
Tighten the lock nuts.
Torque: 35-43 N/m

2.14 GEAR OIL

Gear oil needs to be changed every year.
There is a gear oil Drain Plug at the right side of engine.
Remove the Oil Drain Plug Bolt and to drain dirty oil
The oil filling hole is on the engine case beside gear box. Refill
the case with 70cc / 2.4 oz of SAE 80/90 weight gear oil.
2-7