ETON America, LLC
Service Bulletin
Bulletin No:
0031
Date: 07/20/04
Install the tether switch on the LH side of the handlebars and shown in the picture. Tighten to the
handlebars with the 4 bolts supplied with the switch. Start the bike and lock the parking brake. Pull
the rubber cap from the switch and the bike should stop. If it doesn't check the connections for your
bike as shown in the pictures.
Switch color codes
Red/Black male
White wire female
Safety Tether Switch Installation
40E
50M
Red/Black
Red/ Black
Female
Female
White wire
Blue/ White
Male
Male
70
90R
Red/ Black
White/ Black
Female
Female
Blue/ White Brown/Yel
Male
Male