Fuel Tank; Throttle Valve Disassembly; Caution - Eton America Rascal IXL-40 Service Manual

4.2 FUEL TANK

REMOVAL
Remove the fuel tank cap.
Remove the seat and Body Cover. Disconnect
the fuel line from the carburetor. Unscrew the
fuel tank mounting bolts.
Note: Keep gasoline away from flames or sparks.
Wipe up spilled gasoline immediately.

4.3 THROTTLE VALVE DISASSEMBLY

Remove the throttle top from the carburetor.

4.4 CAUTION

The carburetor top is an integral part of the throttle cable
assembly. The carburetor top cannot be separated from the
assembly without causing damage to the cable.
Never kink or twist control cables. They will not operate
smoothly and may stick if they are kinked or twisted.
Remove the throttle cable from the throttle valve while
depressing the throttle valve spring.
Remove the needle clip retainer.
Remove the needle jet and needle clip.
Inspect the throttle valve and needle jet surface for dirt,
scratches, or wear, and replace if necessary.
4-2