Handlebar - Eton America Rascal IXL-40 Service Manual

FRONT WHEEL/STEERING

8.3 HANDLEBAR

REMOVAL
Remove the throttle lever housing on the right handle bar.
Remove engine switch housing on the left handle bar.
Remove rear brake level bracket.
Remove the bolts attaching the upper holder cover.
Remove the handlebar holder and handlebar.
INSTALLATION
Put the handlebar on the lower holders.
Make sure the handlebar punch marks align with the top of the
lower handlebar holders.
Install the upper handlebar holders with the L or R marks
facing forward.
Tighten the forward bolts first, and then tighten the rear bolts.
Install the upper handlebar holder's cover.
Install the switch housing, aligning the boss with the hole.
Tighten the upper screw first then tighten the lower one.
8-3