Power On/Standby Button - HP ProLiant BL40p Setup And Installation Manual

LEDs and Switches
Table E-4: Fan LEDs
Item
1
2
3
4
5
6
7
8
9

Power On/Standby Button

Setting the server blade Power On/Standby button to the standby position removes
power from most areas of the server blade. This process may take 30 seconds, during
which time some internal circuitry remains active.
IMPORTANT: To remove power completely, remove the server blade from the server blade
enclosure.
E-8
LED Description
Fan 1 Status
Fan 2 Status
Fan 3 Status
Fan 4 Status
Fan 5 Status
Fan 6 Status
Fan 7 Status
Fan 8 Status
Fan 9 Status
HP ProLiant BL40p Server Blade Setup and Installation Guide
Status
Off = Fan not powered
Green = Normal
Amber = Fan failure