Remote Rom Flash - HP ProLiant BL40p Setup And Installation Manual

Configuring and Deploying Server Blades
When the server blade boots, the system identifies whether the current ROM bank is
corrupt. If a corrupt ROM is detected, the system boots from the backup ROM and
alerts you through POST or IML that the ROM bank is corrupt.
If both the current and backup versions of the ROM are corrupt, you must return the
system board for a service replacement. Refer to the HP ProLiant BL p-Class System
Maintenance and Service Guide and contact an HP authorized reseller.

Remote ROM Flash

The system contains individual firmware specific to various components.
The ProLiant BL40p server blade contains:
•
Server blade system ROM
•
Smart Array 5i Plus memory module ROM
•
iLO ROM
The server blade and power enclosures contain:
•
Server blade management module ROM
•
Power management module ROM
Using the Smart Components for Remote ROM Flash with the Remote Deployment
Utility (RDU) console application, Remote ROM Flash enables you to upgrade the
firmware (BIOS) on a server blade from a remote location.
To update the ROM from a remote location, navigate to your server and download
the RDU at
www.compaq.com/support/files/server/us/winroms.html
If a power loss occurs during a firmware upgrade, redundant ROM support enables
data recovery.
2-20 HP ProLiant BL40p Server Blade Setup and Installation Guide