HP ProLiant BL40p Setup And Installation Manual page 39

CAUTION: Always populate drive bays with either a hard drive or blank. Proper
airflow can only be maintained when the bays are populated. Unpopulated drive bays
can lead to improper cooling and thermal damage.
To remove a hard drive blank:
1. Press and hold the release button (1).
2. Pull the blank out of the drive bay (2).
Figure 1-21: Removing a hard drive blank
NOTE: Store the hard drive blank for future use.
To install a hard drive blank, simply align the blank with the empty bay and slide the
blank into the bay until the locking button engages.
HP ProLiant BL40p Server Blade Setup and Installation Guide
Installing the Server Blade and Options
1-27