System Configuration Switch Procedures - HP ProLiant BL40p Setup And Installation Manual

Table D-5: Is the iLO Remote Console Displaying Error Information?
Answer
No
Yes

System Configuration Switch Procedures

When you perform troubleshooting steps, this guide may instruct you to perform the
following procedures:
•
Clear the system configuration.
•
Access the redundant ROM.
IMPORTANT: Do not perform these procedures until directed to do so by the troubleshooting
tables in this appendix.
To complete these procedures, you must either change the settings in RBSU, or
change physical settings on the system configuration switch (SW3). For switch
locations and positions, refer to Figure E-5 in Appendix E, "LEDs and Switches."
HP ProLiant BL40p Server Blade Setup and Installation Guide
Solution
An iLO problem exists. Refer to the HP Integrated Lights-Out User Guide that
ships on the Documentation CD.
Error and event logs are available for diagnosis. Determine the next action by
observing POST progress and error messages. Use the iLO system status
page to help determine the problem. Refer to Appendix C, "Server Error
Messages," and the HP ProLiant Servers Troubleshooting Guide on the
Documentation CD for a complete description of POST error messages.
Troubleshooting
D-11