HP ProLiant BL40p Setup And Installation Manual page 118

System Battery
To install a new battery:
1. Power down the server blade. Refer to "Preparation Procedures" in Chapter 1,
"Installing the Server Blade and Options."
2. Remove the server blade from the server blade enclosure. Refer to "Preparation
Procedures" in Chapter 1, "Installing the Server Blade and Options."
3. Remove the access panel and system board tray. Refer to "Preparation
Procedures" in Chapter 1, "Installing the Server Blade and Options."
4. Locate the battery holder on the system board.
Figure G-1: Battery holder
WARNING: For proper battery disposal, refer to "Battery Replacement Notice"
in Appendix A, "Regulatory Compliance Notices."
G-2 HP ProLiant BL40p Server Blade Setup and Installation Guide