HP ProLiant BL40p Setup And Installation Manual page 44

Installing the Server Blade and Options
4. Open the alignment guide (1).
5. Install the expansion board into the PCI-X slot (2).
6. Close the alignment guide (3).
7. Close the release lever (4).
Figure 1-26: Installing an expansion board
8. Repeat steps 2 through 7 for PCI-X slot 2 if installing an additional expansion
board.
9. Reinstall the access panel.
10. Install the server blade into the enclosure. Refer to "Installing a Server Blade" in
this chapter.
11. Cable the expansion board as necessary. Refer to the documentation included
with the expansion board for instructions.
1-32 HP ProLiant BL40p Server Blade Setup and Installation Guide