Table E-1: Front Panel LEDs
Item
4
5
6
7
8
9
System Board LEDs
The LEDs on the system board will be visible only when the optional diagnostic
station is used to supply power to the server blade, with the access panel removed.
WARNING: To reduce the risk of injury from electric shock hazards, only
qualified service personnel should power up the server blade with the access
panel removed.
Refer to Figure E-2 and Table E-2 to identify system board LED locations and
functions.
HP ProLiant BL40p Server Blade Setup and Installation Guide
continued
LED Description
NIC 1
NIC 2
NIC 3
NIC 4
NIC 5
Power On/Standby
Status
Green = Linked to network
Green flashing = Network activity
Off = No activity
Green = On
Amber = Standby (power available)
Off = Unit off
LEDs and Switches
E-3