HP ProLiant BL40p Setup And Installation Manual page 18

Installing the Server Blade and Options
4. Place the server blade on a flat, level surface.
5. Remove the access panel:
a. Lift up on the hood latch handle until the access panel disengages from the
chassis (1).
b. Slide the access panel about 1.3 cm (1/2 inch) toward the rear of the unit and
lift the panel to remove it (2).
Figure 1-4: Removing the access panel
To replace the access panel, reverse step 5.
1-6 HP ProLiant BL40p Server Blade Setup and Installation Guide