HP ProLiant BL40p Setup And Installation Manual page 23

Installing the Server Blade and Options
7. Disconnect the SCSI backplane power cable from the SCSI backplane board, and
snap the cable into the processor baffle. Refer to Figure 1-8 and Figure 1-9.
Figure 1-8: Disconnecting the SCSI I2C cable and the
SCSI backplane power cable
Figure 1-9: Attaching cables to the processor baffle
NOTE: The chassis has been removed from this illustration for clarity. At this point, the
system board tray assembly will still be inside the chassis.
HP ProLiant BL40p Server Blade Setup and Installation Guide 1-11