Installing A Backup Drive - Fujitsu Siemens Computers PRIMERGY TX120 Options Manual

Accessible drives
6.2

Installing a backup drive

Ê Open the server (see section
Ê Remove the crosspiece (see section
page 20).
Ê Remove the drive cage (see section
Figure 13: Removing the protection shield from the 3.5-inch bay
Ê Grasp the protection shield through the holes and pull it out in the direction
of the arrow.
V
CAUTION!
Store the protection shield in a safe place. If the backup drive is
removed again and not replaced with a new one, then the protection
shield must be reinstalled due to cooling, the applicable EMC regula-
tions (regulations on electromagnetic compatibility) and fire
protection.
TX120
"Opening the server" on page
"Removing the crosspiece" on
"Removing the drive cage" on page
Options Guide
Installing a backup drive
19).
21).
31