Fujitsu Siemens Computers PRIMERGY TX120 Options Manual page 34

Installing a backup drive
Figure 17: Connecting the USB and power cables to the backup drive
Ê Plug the USB cable (1) and the power cable (2) into the backup drive (see
cabling diagrams in the appendix).
Ê Plug the other end of the USB cable into the system board (see cabling
diagrams in the appendix).
Ê Install the drive cage (see section
Ê Install the crosspiece (see section
34
1
"Installing the drive cage" on page
"Installing the crosspiece" on page
Options Guide
Accessible drives
2
41).
43).
TX120