Installing And Removing The Hard Disk Drive - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

System expansions
In the case of improper use of the cutting tool, there is a risk of
injury and damage to the casing.
Beware of sharp edges when cutting out the installation panel.
Do not throw away the cover. For cooling, protection against fire, and in order to
comply with EMC regulations (regulations regarding electromagnetic compatibility),
you must refit the covers if you remove the drive again later.
► If you are installing a second drive, push the cover (3) out of the casing and remove
the installation panel beneath it using a cutting tool.
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.

Installing and removing the hard disk drive

Harddiskdrive, Harddiskdrive, Harddiskdrive,
Removing a hard disk drive
► Open the casing (see
Harddisk drive,
► Disconnect all cables connected to the drive and fan (data cable, power supply cable).
56
"Closing the casing", Page
"Opening the casing", Page
39).
37).
A26361-K1182-Z120-1-7619, edition 3