Procedure - Fujitsu Siemens Computers PRIMERGY TX120 Options Manual

2

Procedure

V
CAUTION!
The actions described in this manual should only be performed by
technical specialists.
Equipment repairs should only be performed by service personnel.
Any unauthorized opening and improper repairs could expose the
user to risks (electric shock, energy hazards, fire hazards) and could
also damage the equipment.
Any unauthorized opening of the device will result in the invalidation
of the warranty and exclusion from all liability.
Ê First of all please familiarize yourself with the safety instructions in
"Safety" on page
Ê Ensure that all required manuals (see
are available, printing out the PDF files if necessary. You will definitely need
the Operating Manual for the server and the Technical Manual for the system
board.
Ê Shut down the server correctly, switch it off, pull out the power plug(s), and
open the server as described in
Ê Extend or upgrade your server as described in the relevant chapter.
I
The Operating Manual for the server describes how you
install/remove the hot-plug components.
Ê Close the server, connect it to the power outlet, and switch it on as described
in chapter "Completion" on page
Ê Start the operating system and, if necessary, configure it as required (see
the Operating Manual).
TX120
13.
chapter "Preparation" on page
41.
Options Guide
"Documentation overview" on page
chapter
6)
19.
11