Fujitsu Siemens Computers PRIMERGY TX120 Options Manual page 26

Expanding/replacing the working memory
Installing a memory module
Figure 8: Installing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding
slot.
Ê Insert the memory module into the slot with the connecting contacts and the
notch first until the side brackets engage on the memory module.
Ê Install the crosspiece (see section
Ê Close the server (see section
Ê If necessary, place the server in the vertical position as described in the
operating manual
Ê Connect the system to the line voltage and switch it on.
26
"Installing the crosspiece" on page
"Assembling the server" on page
Options Guide
Working memory
43).
44).
TX120