Fujitsu Siemens Computers PRIMERGY TX120 Options Manual page 40

Installing an expansion card
Figure 22: Closing the lock and fastening the slot cover
Ê Close the lock again until it engages.
Ê If necessary, connect the cable to the expansion card and the other compo-
nents.
Ê Close the server (see section
Ê If necessary, place the server in the vertical position as described in the
operating manual
Ê Connect the system to the line voltage and switch it on.
40
Expansion cards in the PCI slots
"Assembling the server" on page
Options Guide
44).
TX120