Rack Model; 13.3.1 Closing The Server - Fujitsu Siemens Computers PRIMERGY TX200 S4 Server Options Manual

Completion
13.3

Rack model

13.3.1 Closing the server

Ê Open the latch.
Ê Position the top cover in the five recesses of the housing.
Ê Push the top cover against the housing and push down the latch.
Closing the latch pushes the top cover to the front side and the hooks on the
right-hand side cant of the top cover engage.
If you have not removed the server from the rack cabinet, please skip this step:
V
CAUTION!
At least two people are required to install the server in the rack cabinet.
Do not use the handles on the rack front cover to lift the server into the
rack.
Ê Lower the server from above onto the rails.
Figure 74: Installing the server in a rack cabinet
Ê Push the server as far as it will go into the rack (1).
Ê Fasten the server in the rack using the two knurled screws (2).
TX200 S4
2
Options Guide
Rack model
2
1
1
89